FAQ

Yes, Elise 900 is homologated for road use in all EU countries.

added 08. 10. 2021

Charging up to 80% takes around 3 hours. This can differ, as we have multiple options for chargers with different capabilites and connectivity options, from a standard 3-phase charger to a 1-phase houselhold socket charger.

added 08. 10. 2021

The front turning radius of Elise 900 is 2000 mm and the rear turning radius is 1500 mm.

added 08. 10. 2021

Elise 900 has a ride height of over 26cm (262mm exactly).

added 08. 10. 2021

The machine offers 4 operational speeds. The minimum speed is 0,15 km/h, which can be smoothly increased up to the maximum speed of 12 km/h.

added 08. 10. 2021

Thanks to its unique design, where the batteryis located between the wheels, which gives the machine a very low centre of gravity, the machine has exceptional stability and can safely tilt to the side at a 47 degree angle.

added 08. 10. 2021

Elise 900 can be controlled either from the driver's cab, as well as remotely from either the app or the optional Danfoss controller.

added 08. 10. 2021

The total load which Elise 900 can manipulate with depends on the battery configuration. In case of the 400Ah battery, the maximum load is 1400kg, while with the 240Ah battery, the maximum load is 900kg. Both configurations can lift the load up to the height of 3637mm.

added 08. 10. 2021

You don't have to worry about losing the mobile phone you've been using for operating the machine. Elise 900 can be controlled remotely from any Android or iOS phone with the KOVACO app. All you need to do is download it via GooglePlay or AppStore, and log in with your KOVACO account. If you don't have any access to a mobile phone, the machine can be operated in a limited extend from the cab.

added 08. 10. 2021

Periodic service will be performed by a service technician every 500 operating hours. This includes a complete check of bolt and screw tightness, transmission oil change, hydraulic filter replacement. and other maintenence. The complete list of steps can be found in the user manual.

added 08. 10. 2021

Hydraulic oil should be changed every 1500 operating hours. The transmisson oil should be changed after the first 50 operating hours, and then every 500 operating hours.

added 08. 10. 2021

A general examination should be performed ever 10 operating hours, where you should examine the greasing of the pins, the visual condition of the machine and the level of electroylte in the accumulator. The complete list of steps can be found in the user manual.

added 08. 10. 2021

We use lead acid batteries, which we chose mainly for their simplicity, price and compared to lithium ion batteries for their nearly perfect recyclability. Their higher weight provides the machine wiht a low centre of gravity, offering the machine with great terrain capabilites as well as exception stability.

added 08. 10. 2021

First, lift the upper service hatch at the rear of the vehicle, which reveals the battery charging connector, where the charging cable shall be connected.

added 08. 10. 2021

Elise 900 is equipped with 3 GEW (asynchronic) electric motors, two of which control the movement of the machine, while the other powers the hydraulic pump.

added 08. 10. 2021

The hydraulic system has 4 operational speeds. Its working pressure is 180 bar, while the working flow is 65 l/min. The hydraulic tank capacity is 40 l.

added 08. 10. 2021

Depending on the type of usage the difference can be as high as 4 hours.

added 08. 10. 2021

The machine is equipped with a safety brake, which will unlock only when there is a direct imput for movement.

added 08. 10. 2021

Elise 900 is designed so it can function with wheel as well as tracks. A rubber or steel track can be attached to the wheels using a spacer at the hub. The spacers then need to be removed when taking off the tracks.

added 08. 10. 2021

Machines with HOPPECKE batteries are shipped with a dedicated external HOPPECKE charger, according to the battery capcity. SILAD battery equipped machines can be delivered with either STAR or ENERPULSE chargers, also according to the battery capacity. We don't normally offer machines with an integrated charger, however, on the customer's request we are able to fit the SILAD 400Ah battery powered machines with a ZIVAN 96V/25A integrated charger. This is a 1 phase charger, with limited output, therefore to achieve the optimal charging performance, we fit our machines with two of these chargers.

added 08. 10. 2021

Yes, Elise 900 can be equipped with A/C as an option. It comes standard with an ambient air fan as well as heater.

added 08. 10. 2021

It's designed up to 500 Nm of torque, however it is only required for 150Nm. One of our customers has a machine which has already been performing for over 4000 operating hours, and it didn't require any belt-related maintenance. However, spare drive belts are in stock if needed.

added 08. 10. 2021